Description
X-Fe Forte iron stain remover is for use on porous surfaces like concrete, timber, bricks and paving. It’s ideal for use on driveways, retaining walls, paved areas, brick walls, windows, stonework and other outdoor surfaces. X-Fe Forte is a similar product to X-Fe, available in the same sizes at the same price, but is a thinner liquid that seeps into porous surfaces and “chases” the stain better than X-Fe. The coverage area is difficult to estimate because the porosity of the surface being treated will affect coverage due to varying absorption rates. Best of all, X-Fe Forte is completely biodegradable and easy to use.
Applications
Removing bore water stains from Porous surfaces
- Driveway
- Paving
- Brick Wall
- Footpath
- Render
- Sandstone
Features
- The time spent on trying to remove iron and rust stains is excessive – so much so that only half a job is done or no attempt is made at all!
- With the advent of X-Fe the removal of the stains need not be a special job. It can be incorporated into a regular cleaning programme.
- It is not necessary to use X-Fe every day, after the initial removal of the stain X-Fe needs only to be applied if the stain reappears.
- The benefits of using X-Fe are many – it is a user-friendly product with a pleasant aroma, no astringent fumes, completely biodegradable and very cost effective.
- X-Fe is well accepted by people who use it. They are amazed that X-Fe is so easy to use, no hard scrubbing is needed and it can be used on any surface.
- X-Fe is manufactured in Australia by an Australian Company
- X-Fe Forte can also be used as an effective timber cleaner. It will clean new timber or restore old greying timber before oiling, staining or painting. X-Fe Forte can be used where weathered timber bleaches are required for preparation or restoration works.
- Bore water and rusty metal leave unsightly stains that build up over time and become impossible to remove with normal cleansers or those other products that call themselves iron stain removers!
- Our X-Fe products will remove iron and rust stains quickly and easily without the hard scrubbing necessary with the others! They will also remove stains caused by gardening products containing iron.
- X-Fe products work by dissolving the iron precipitate that causes the stain, whether from bore water, old metal, or a stain on the driveway from a leaking radiator.
- X-Fe products are simple to apply. Paint or spray onto the surface, leave it for a while, and the stain will disappear. No need to scrub at all! As with all cleaning products, a small area should be tested first to ascertain the suitability of the product.
Directions
Apply X-Fe onto the stained surface using a paintbrush. When the stain disappears, wash the area down. Stubborn stains may require agitation with a brush and/or repeat application. Avoid contact with untreated metal surfaces.
Always Spot Test Before Use
