Description
X-Fe is used on non-porous surfaces like bathrooms, fibreglass, Colorbond, glass and other painted surfaces. X-Fe is a higher viscosity cleaner with the same consistency of paint which is designed to “cling” better to the area being cleaned and is therefore easy to use on vertical or sloping surfaces. Clean up ceramic tiles, porcelain, toilets, showers, outdoor furniture and boats. Best of all, X-Fe is easy to use, has a pleasant aroma and is completely biodegradable. Coverage is 16-20 square metres per litre of product.
Bore water and rusty metal leave unsightly stains that build up over time and become impossible to remove with normal cleansers or those other products that call themselves iron stain removers!
- X-Fe products will remove iron and rust stains quickly and easily without the hard scrubbing necessary with the others! They will also remove stains caused by gardening products containing iron.
- X-Fe products work by dissolving the iron precipitate that causes the stain, whether from bore water, old metal, or a stain on the driveway from a leaking radiator.
- X-Fe products are simple to apply. Paint or spray onto the surface, leave it for a while, and the stain will disappear. No need to scrub at all! As with all cleaning products, a small area should be tested first to ascertain the product’s suitability.
Features
The time spent trying to remove iron and rust stains is excessive – so much so that only half a job is done or no attempt is made!
With the advent of X-Fe, stain removal need not be a special job. It can be incorporated into a regular cleaning programme.
It is not necessary to use X-Fe every day. After removing the stain, X-Fe should only be applied if it reappears.
There are many benefits of using X-Fe: It is a user-friendly product with a pleasant aroma, no astringent fumes, is completely biodegradable, and is very cost-effective.
X-Fe is well-accepted by people who use it. They are amazed that X-Fe is so easy to use, no hard scrubbing is needed, and it can be used on any surface.
X-Fe is manufactured in Australia by an Australian Company.
Applications
Removing bore water stains from Non-Porous surfaces
- Toilet
- Shower
- Fence
- Window
- Boat
- Tiles
Directions
Apply X-Fe onto the stained surface using a paintbrush. When the stain disappears, wash the area down. Stubborn stains may require agitation with a brush and/or repeat application. Avoid contact with untreated metal surfaces
Always Spot Test Before Use
