Please Note: The Jimten MD fitting range is while stocks last. We will send all Jimten fittings available. However, for orders requiring more than stocks available, we will supply the Irritec Range.
Features
- Manufactured from a Raw Material Approved For Use With Potable (drinkable) Water.
- Manufactured for Use on Medium Density and Low Density Pipe
- Weather, Termite, Fungi & Bacteria Resistant.
- Common Applications Include Horticultural, Agricultural, Irrigation & Plumbing.
- WRAS approved (United Kingdom) Worlds Toughest certification
- Threads according to: UNE 19 009, ISO-R 7, UNI 338, DIN 2999
90° Elbow with female thread for Medium Density Polyethylene (MDPE) Pipe, for connecting pipe at a 90° angle to a male thread.
Replacement fitting for:
- Plasson
- Plassim
- Esse
- Elysee
- Georg Fischer
- Hydrodif
- RX Metric Polyethylene fittings.
Medium Density Fittings
Used for:
- Medium Density Pipe
- Blueline
- SKU: 2500-(OD Pipe Size)PN12-5-(Coil Length)
- e.g 2500-25PN12-5-100 (25mm = OD size, PN12.5 = Bar, 100 = Coil Length)
- Redline
- SKU: 360-(OD Pipe Size)PN(Bar Rate)-(Coil Length)
- e.g 360-63PN9-100 (63mm = OD size, PN9 = Bar, 100 = Coil Length)
- Greenline
- SKU: 370-(OD Pipe Size)PN(Bar Rate)-(Coil Length)
- e.g 370-32PN8-100 (32mm = OD size, PN8 = Bar, 100 = Coil Length)
- Blueline
Tips:
- Medium-density pipe is referred to by its outside diameter (OD)
- Medium Density Fittings go overtop of MD Pipe
- The pipe needs to be pushed past the o-ring in the MD fitting to seal
- If the MD pipe is scratched or gouged, it may not create a seal on the o-ring and leak.
- Use tools to tighten
