Hansen Female Bend
Price range: $13.52 through $33.17
Used for connecting low density polyethylene pipe (LDPE) and Enduroflex to male threads Can also be used to connect flexible pipe and hose to male threads.
Features
- Max pressure at 20º Celius = 16 Bar
- Precision Heavy Duty Tapered Threads give a Strong Reliable Seal.
- Manufactured from a Raw Material Approved For Use With Potable (drinkable) Water.
- Manufactured from High Quality Glass Fibre Reinforced Nylon.
- Weather, Termite, Fungi & Bacteria Resistant.
- Common Applications Include Horticultural, Agricultural, Irrigation & Plumbing.
- Fire Rating UL94HB and UV Stabilised.
Low Density Fittings
Used for:
- Low-Density Pipe
- SKU: 300-(ID Pipe Size)-(Coil Size)
- e.g 300-25-100 (25mm = ID Size, 100 = Coil Length)
Tips:
- Low-density pipe is referred to by its inside diameter (ID)
- The low-density fitting barbs go inside the pipe
- The LD screw nut tightens overtop of the LD pipe.
- Tighten with spanner or pipe grips.
Wind the nut by hand onto pipe as tight as possible. Use a spanner or pipe grips to tighten until nut is firm on pipe.
What type of pipe will Hansen Easy Fit Poly Fittings connect to? Expand
New Zealand LDPE (Low Density Polyethylene Pipe), EnduroFlex, Australian Rural Class B, Irish Imperial Polyethylene Pipes (including wash down hose and non toxic tube).
What is the best size of pipe for my needs? ExpandRefer to a qualified water reticulation installer for professional advice to suit your needs.
Can I use my Hansen Easy Fit Poly Fittings with my swimming pool/spa pool set up? ExpandNo, as the high concentration of chlorine used in the water for pools will attack the material. The fitting material is only suitable for use with domestic water. Hansen products that are used in this application will not be covered by warranty.
Can you use Hansen Easy Fit Fittings under driveways, paths and foundations? ExpandHansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths, or foundations.
What temperature can I use Hansen Easy Fit Poly Fittings at? ExpandHansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
Can I use Hansen Easy Fit Poly Fittings in marine applications? ExpandYes. While marine applications vary, Hansen Easy Fit Poly fittings are resistant to sea water. The fittings will not leach any substances that will be harmful to marine life. Hansen Easy Fit Poly fittings have provided excellent service in marine applications for many years without failure. If you require further information, please contact us by email with details regarding your application.
Related Products
-
Hansen Han-Tool
$78.49 -
Hansen Low Density Tow Eye
Price range: $15.78 through $22.38 -
Hansen Low Density Poly Nut (Spare Part)
Price range: $1.07 through $4.45 -
Hansen Reducing Female Straight Coupling
Price range: $7.37 through $23.05 -
RX Plastic Threaded Hex Cap
Price range: $2.22 through $7.54 -
Hansen Reducing Tee Connector
Price range: $12.90 through $58.95 -
Hansen Reducing Male Straight Coupling
Price range: $6.23 through $7.49 -
Hansen Female Threaded Tee Connector
Price range: $13.72 through $58.77 -
Hansen Tee Connector
Price range: $10.90 through $58.95 -
Hansen Bend
Price range: $12.12 through $48.39
