Go to cart
Call our Experts - 0800 130 905

PVC Barrel / Socket Unions – Female Thread


Please note: PVC pressure fittings are not compatible with Drainage, Storm Water or Drain Waste and Vent Pipe

Details Code Price Quantity  
15mm Threaded Socket Union 811T-15 $4.83
 incl GST
20mm Threaded Socket Union 811T-20 $6.12
 incl GST
25mm Threaded Socket Union 811T-25 $9.17
 incl GST
32mm Threaded Socket Union 811T-32 $11.99
 incl GST
40mm Threaded Socket Union 811T-40 $16.23
 incl GST
50mm Threaded Socket Union 811T-50 $23.38
 incl GST
65mm Threaded Socket Union 811T-65 $54.67
 incl GST
80mm Threaded Socket Union 811T-80 $51.55
 incl GST
100mm Threaded Socket Union 811T-100 $102.29
 incl GST
View Full Product Page

SKU: 811T Categories: , ,
PVC Barrel / Socket Unions - Female Thread

Product Details

  • System: PVC pipe system
  • Scope: PVC pipework is used for the conveyance of drinking water, waste water, chemicals, heating fluid and cooling fluids, foodstuffs, ultra-pure liquids, slurries, gases, compressed air and vacuum system applications.
  • Size: 15mm - 400mm

Specification: All UPVC Pipe and Fittings are manufactured in compliance with AS/NZS 1477, the Australian and New Zealand standard for PVC Pipe and Fittings. UPVC Pipe is manufactured from 100% virgin Unplasticised Polyvinyl Chloride compound, no reworked material are used. All pipes are produced under strict ISO 9002 Quality Assurance System.


  • Suitable for temperatures from 0°C to 60°C.
  • PVC is non-toxic and taint free making this a suitable piping system for potable drinking water systems.
  • Commonly used in Pumping Systems for Dairy Sheds, domestic and industrial plumbing, Water Filtration Systems, Wastewater Applications and Irrigation Systems.

Referenced Standards: AS/NZS 1477



This a suitable piping system for potable drinking water systems.Commonly used in Pumping Systems for Dairy Sheds, domestic and Water Filtration Systems, Wastewater Applications and Irrigation Systems.

  • Construction pipeline system
  • Agricultural irrigation pipeline system
  • Pool pipeline system
  • Industrial pipeline system
  • Water treatment pipeline system
  • Fishery aquaculture pipeline system

Installation & Testing

  1. Pipe cutting: according to the use requirements, after measuring the appropriate length, the required pipe can be cut by hand or machine. When cutting, keep both ends vertical and flat, and use a file to cut Deburring and sharp edge, but the chamfer should not be too large.
  2. Bonding of pipes and fittings: before bonding, trial assembly must be carried out, installation position must be determined and marked, length of inserted pipe end (socket depth + 10mm) and inner wall of socket of pipe fittings shall be cleaned, Then wipe with cotton yarn stained with acetone. After acetone volatilizes, evenly brush the adhesive on the outside of pipe end and inside of socket. It should not be too thick, but it should not be missed. Insert after painting and rotate. To the ideal combination angle required for installation, make all the pipes inserted into the socket, fix them by themselves after about 2 to 3 minutes, and wipe off the excess adhesive overflowing from the bonding place to keep the pipe clean. Now cut. Do not force to open or rotate the direction, otherwise it will cause leakage. The adhesive component shall not be subjected to external force within 1 hour, and shall not be watered within 24 hours. The test can be conducted only after the curing time is completed.
  3. The pipeline installation must have a reliable seal to ensure that there is no leakage in the process of use. Fixing devices (pipe clamps) shall be installed every 1.5m to 2.0m.
  4. Because the plastic pipe has certain plasticity, when the horizontal pipe is installed, the bracket or elevator is set every 0.6m to prevent the plastic pipe from deformation and affect the use.
  5. The water supply pipe shall be far away from the heat source, and the clear distance between the riser and the stove edge shall not be less than 400mm, and the clear distance between the riser and the heating pipe shall not be less than 200mm.
  6. After construction, the pipe can be sealed with soil only after passing the pressure test.
  7. Please refer to the relevant construction specifications of the Ministry of construction for specific installation and use.
PVC Fitting Dimensions - 811
PVC Fitting Chart Dimensions - 811

Dimensions are an indication only and may vary on PVC Fitting. 

  • brass ball valve mf

    Brass Ball Valves with Short Handle – Male x Female Threads

    Select options
  • Hansen Hex Nipple

    Hansen Hex Nipple

    Select options
  • Male Straight Coupling

    Hansen Male Straight Coupling

    Select options
  • PVC Valve Socket

    PVC Valve Socket

    Select options
  • Valve Spigot

    PVC Valve Spigot

    Select options