Skip to main content
Need help? Call free
0800 130 905
$0.00 0

Cart

No products in the cart.

$0.00 0

Cart

No products in the cart.

Irrigation Design Services

$0.00 0

Cart

No products in the cart.

PVC Tee

Price range: $1.01 through $353.38

PVC-U fittings are designed and manufactured to AS/NZS 1477 for various water industry applications.

(Please note: PVC pressure fittings are not compatible with Drainage, Storm Water or Drain Waste and Vent Pipe)

Details Code Price Quantity
125mm PVC Tee
125mm PVC Tee 804-125 $99.31 incl GST
15mm PVC Tee
15mm PVC Tee 804-15 $1.01 incl GST
32mm PVC Tee
32mm PVC Tee 804-32 $3.06 incl GST
20mm PVC Tee
20mm PVC Tee 804-20 $1.14 incl GST
25mm PVC Tee
25mm PVC Tee 804-25 $2.14 incl GST
40mm PVC Tee
40mm PVC Tee 804-40 $3.84 incl GST
50mm PVC Tee
50mm PVC Tee 804-50 $5.34 incl GST
65mm PVC Tee
65mm PVC Tee 804-65 $18.37 incl GST
80mm PVC Tee
80mm PVC Tee 804-80 $18.73 incl GST
100mm PVC Tee
100mm PVC Tee 804-100 $41.62 incl GST
150mm PVC Tee
150mm PVC Tee 804-150 $112.08 incl GST
200mm PVC Tee
200mm PVC Tee 804-200 $353.38 incl GST
SKU: 804

Product Details

  • System: PVC pipe system
  • Scope: PVC pipework is used for the conveyance of drinking water, waste water, chemicals, heating fluid and cooling fluids, foodstuffs, ultra-pure liquids, slurries, gases, compressed air and vacuum system applications.
  • Size: 15mm – 200mm


Specification:
All UPVC Pipe and Fittings are manufactured in compliance with AS/NZS 1477, the Australian and New Zealand standard for PVC Pipe and Fittings. UPVC Pipe is manufactured from 100% virgin Unplasticised Polyvinyl Chloride compound, no reworked material are used. All pipes are produced under strict ISO 9002 Quality Assurance System.

Scope:

  • Suitable for temperatures from 0°C to 60°C.
  • PVC is non-toxic and taint free making this a suitable piping system for potable drinking water systems.
  • Commonly used in Pumping Systems for Dairy Sheds, domestic and industrial plumbing, Water Filtration Systems, Wastewater Applications and Irrigation Systems.

Referenced Standards: AS/NZS 1477

PVC fittings internal diameter

 

A confusing part of the PVC labelling is that the numbers don’t correspond to any physical measurement.

All the PVC fittings have an actual ID measurement larger than the label states.

For example, a 20mm PVC fitting has an ID of 26.7mm.
PVCDiameters PVCTeeID PVC Fitting Dimensions - 804 PVC Fitting Chart Dimensions - 804

Dimensions are an indication only and may vary on PVC Fitting. 

Tips:

  • PVC Pipe is referred to by its inside diameter (ID)
  • Use Primer to clean the fitting and pipe before installation
  • Apply Solvent Cement on both the PVC pipe and fitting
  • Secure the fitting and hold to dry for 30 seconds
  • PVC Spigot fittings are male and go inside the female PVC Socket fittings or pipe
PVC-Pipe-Fitting
NZ's largest online irrigation store. Your solution to all things irrigation — from a single dripper to a full pivot.
5 Triton Avenue, Mount Maunganui 3116
© Irrigation Express 2026 · NZ + AU