Description
Ensure safe and reliable rainwater across your whole home with the Puretec Hybrid E9. The all-in-one dual stage filtration system with UV is perfect for large households with 2+ bathrooms. Designed to reduce up to 99.99% of bacteria to deliver filtered water to every tap, shower, and appliance. The system uses 20 inch cartridges, starting with a 20-micron washable sediment filter for coarse particles like dirt and rust, followed by a 1 micron filter for finer matter. Built tough with an aluminium ballast enclosure, it's made for harsh conditions and easy for a plumber to install.
Specifications
- Model Number: HYBRID-E9
- Maximum Flow Rate: 130 Lpm
-
Min/Max Pressure: 300-875* kPa
-
Connection (Inlet/Outlet): 1” BSP(Male) (25 mm)
-
Micron Rating: 1 Micron*
-
Replacement Cartridge(s)
-
Sediment Filter Cartridge: PL20MP2
-
Sediment Filter Cartridge: PX01MP2
-
Cartridge Size: 20” x 4.5”
- Warranty: 3 Years^
Features
- Access essential rainwater filtration at every outlet of your home.
- Dual stage filter system Radfire™ UV technology.
- Kills up to 99.99% of bacteria.
- Filters sediment, bad taste, odour and colour.
- Reversible system for easy plumber installation and brass inserts.
- New and improved straight edged electronic controller.
- Anti-tamper and child-proof lockable lid.
- UV lamp count-down timer and alarm to keep track of when to change the lamp.
- Dual O-ring seals on housings to better protect the system against leaks.
- Experience peace of mind with the support of a 3-year warranty*.
- *Hybrid E series: 3 year warranty is 1 year parts and labour, 2 years parts only. Excludes consumables, RES7 warranty is 3 years (1 year parts & labour, 2 years parts only).
- Brass inlet, stainless steel outlet (with supplied brass nipples).
Warranty: ^Warranties in this document cover parts for the period stated and include cover for parts and labour for the first year where applicable, subject to approval. Excludes consumables. *Micron Rating is nominal. Our Water Filtration Specialists can provide you with advice to suit your needs. **Where line pressure exceeds 520kPa, an approved pressure limiting device must be installed to comply with Australian & New Zealand Plumbing Standards (Ref. AS 35001:2021, Clause 3.3.4). Maximum flow depends on cartridges, vessel, pressure, impurities etc.
