Description
The PureMix Z7 inline water filter is specifically designed for applications with higher sediment levels and harsher water quality, such as rural supplies, areas with older pipe infrastructure, and both mains water and rainwater. The Z Plus filtration technology effectively reduces unwanted elements in your water, including sediment, chemicals like PFAS, chlorine, and unpleasant tastes and odours, while also protecting against Giardia and Cryptosporidium down to approximately 1 micron. Additionally, it incorporates anti-scaling protection to prevent mineral buildup.
Benefits
- Specifically designed for mains, rain, harsh and rural water supply.
- Increased capacity to a massive 63,500 Litres.
- With the introduction of Z Plus Technology, this Z7 cartridge can inhibit bacterial growth.
- Effectively filters chlorine, cysts, trihalomethane (THM's)
- Sediment, dirt, rust and other particles filtered down to 1 micron including Giardia and Cryptosporidium cysts+.
- No need for a separate filter tap.
- Quick and easy installation, ideal for stone bench tops. Mounts horizontally or vertically - no shelf cut-outs required.
- Incorporates Anti-scaling protection to prevent mineral buildup.
Features
Filters PFAS Chemicals
Puremix Z7 is the better option after a primary whole house filter, adding a secondary filter with activated carbon can provide an additional layer of protection against PFAS chemicals.
Valve-in-filter Head Technology
Puretec provides a complete kit for a standard installation and has introduced valve-in-filter head technology, which means the cartridge can be quickly and easily changed without turning off the water supply.
Filters As Easy To Change As A Light Globe
The Puretec PureMix Z7 quick-change cartridge can be easily replaced - just like changing a light globe. It also incorporates Puretec’s long-life filter technology, so you can go longer between filter replacements, and comes with our ^10 Year Warranty.
No Extra Tap Required - Fits Any Standard Mixer Tap
The PureMix Z7 installs under your existing kitchen bench and uses your current tap. This inline filter can be installed vertically or horizontally, so it won’t clutter up your cupboard.
Specifications
- Flow Rate : 9.5 Lpm at 420 kPa
- Replacement Part Code :
- Min/Max Temperature : 0° - 38°C
- Min/Max Pressure : 200 - 520 kPa
-
Micron Rating : 1 Mircon*
- Capacity : 63,500 Litres*
- Connection : ½” BSP [15 mm]
- Warranty : 10 Years^
Note: Use only genuine Puretec replacement cartridge. ^10 year warranty is 1 year parts and labour, plus 9 years parts only. Excludes cartridges. *Micron Rating is nominal. *Capacity is based on inlet chlorine @2ppm ±10%. Refer to the Spec Sheet and User Guide for a full breakdown of installation requirements.
