Features
- Body material Nylon 66 30% glass filled
- Natural Nitrile elastomer diaphragm, or optional Viton diaphragm
- Bonnet screws stainless steel 304 304
- Stainless steel 40 mesh screen (on inlet side of valve)
- WATERMARK approval ATS 5200.030-2004.
Electrics
- Solenoid encapsulant Nylon 66 (30%)
- Glass filled Magnetic stainless steel grade plunger
- Natural Nitrile elastomer plunger tip
- Stainless steel 302 plunger spring Voltage 24Vac - 240Vac 50Hz or optional 12vac Voltage tolerance +10% or -10%
- Power consumption 8 VA Inrush current 320mA Holding current 260mA
Operation
The valve will operate correctly with in the following conditions:
- Ambient temperature 2° C to 60° C
- Relative Humidity 0% to 100%
- Temperature of water 2° C to 80° C
- Direction of flow markings on body (check before installing)
- Minimum operating pressure 20kpa
- Maximum operating pressure 1250kpa
- Supply pipe velocity range 1.2 m/s to 6.5 m/s
- Opening speed 1 sec
- Closing speed 1 sec
