Features
- Bi-directional flow measurement over a wide dynamic range
- Optional for subsoil installation and constant flooding
- Proven and unsurpassed lifetime, huge installed base
- Standard wet calibration
- PP, PO or hard rubber liner: suitable for low concentrated chemicals
- Tamper proof
- Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
- Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
- Full bore design: No moving parts, no wear, no pressure loss
- Meets potable water standards: ACS, DVGW, NSF, TZW, WRAS etc.
Overview
The Krohne OptiFlux is an electromagnetic flow meter (EMF) for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required.
Its wear resistant liner materials as well as its full bore design without moving parts make the OptiFlux 2100 an effective replacement of mechanical water meters in drinking water distribution networks. The meter features a wide range of approvals necessary for potable water measurement. A full on-site verification of the meter without process interruption can be carried out using the OptiCheck service tool.
Applications
- General
- All standard water and wastewater applications
- Water and wastewater industry
- Abstraction and irrigation
- Monitoring of distribution networks
- Water treatment plants (raw water, drinking water, treatment chemicals)
- Wastewater networks
- Combined and separate sewage systems
- Storm water overflows (SWOs)
- Municipal wastewater treatment plants
- Desalination plants (sea water, permeate, brine)
- Iron, metal and steel industry, chemical and other process industries
- Industrial water (process or production water, cooling water, boiler feed water etc.)
- Industrial wastewater collection, treatment and return flows
- Ballast water, injection water etc.
Parts
- KCURCABLE - Krohne Current Cable - per meter
- KSIGCABLE - Krohne Signal Cable - per meter
- KMAGWIRING - Wiring Termination & Connection to Krohne Flow Sensor
- KMAGPOTTING - IP68 Potting & Cable Termination for Krohne Flow Sensor - Recommended
- Cable and potting are required to be ordered with the Meter, we will not send out an unpotted Meter.
Features
- Available in 10-30VDC or 230VAC models - Please contact to specify
- AS2129 Table E & AS4087 PN16 Flanges available
- IP68 version available for below ground installation
Supplied with IFC 100 Wall Mount Panel
The compact version is available - please contact our sales team for this
