Go to cart
Call our Experts - 0800 130 905

Hansen Tapping Saddles – Medium Density

$9.50$22.92

  • Designed and manufactured with extra bolt holes on the larger sized saddles for peace of mind
  • Common Stainless Steel M8 bolt on all sizes means only one tool required
  • Strong Compact Design Manufactured from strong, non-corrosive UV stabilised materials for a long life
Details Code Price Quantity  
32mm x 25mm Hansen Medium Density tapping saddle HTSMD3225 $9.50
 ex GST
40mm x 25mm Hansen Medium Density tapping saddle HTSMD4025 $15.27
 ex GST
40mm x 32mm Hansen Medium Density tapping saddle HTSMD4032 $15.27
 ex GST
50mm x 25mm Hansen Medium Density tapping saddle HTSMD5025 $16.99
 ex GST
50mm x 32mm Hansen Medium Density tapping saddle HTSMD5032 $16.99
 ex GST
50mm x 40mm Hansen Medium Density tapping saddle HTSMD5040 $20.18
 ex GST
63mm x 25mm Hansen Medium Density tapping saddle HTSMD6325 $21.60
 ex GST
63mm x 32mm Hansen Medium Density tapping saddle HTSMD6332 $21.60
 ex GST
63mm x 40mm Hansen Medium Density tapping saddle HTSMD6340 $20.18
 ex GST
63mm x 50mm Hansen Medium Density tapping saddle HTSMD6350 $22.92
 ex GST
View Full Product Page

Features

  • Designed and manufactured with extra bolt holes on the larger sized saddles for peace of mind
  • Common Stainless Steel M8 bolt on all sizes means only one tool required
  • Strong Compact Design Manufactured from strong, non-corrosive UV stabilised materials for a long life

Hinge

The ability to open past 180° degrees makes it an excellent choice for tight spots. The hinge stays connected for a fast, easy one piece installation.

 

Spigot

The spigot helps locate and secure the Hansen MD Tapping Saddle onto the pipe, reducing loss of seal if the pipe or saddle move under load.

Pilot Hole

A pilot hole located at the base of each saddle makes installation easy.

Custom Seal

Small spigots on the internal seal that are visible from the outside help locate it correctly and removes any second guessing if the seal has been installed or not.

Bolts

Only one bolt required which is fixed to the body ensuring no lost parts and the common Stainless Steel M8 bolt on all sizes means only one tool is required for installation - a major time saver. Larger sizes can have up to three bolts if preferred.

How To:

img

1.

Select a hole saw to fit between the min. and max. as marked on the saddle body of your Hansen Tapping Saddle.

img

2.

Use the pilot guide located on the base of the Hansen Tapping Saddle as a guide to start drilling, then remove the Hansen Tapping Saddle and complete the drilling. Clean off the burrs from the pipe.

img

3.

Ensure the internal seal is installed. Use the small white spigots to help locate it correctly. Place the Hansen Tapping Saddle around the pipe using the saddle spigot to help locate it in the drilled hole.Tighten bolt.

img

4.

When adding additional fittings it is recommended that either a thread sealing paste or thread sealing tape be used on all threaded connections. We recommend Ceelon Thread Tape