-
×
Blueline Medium Density Pipe - PN12.5 - 25mm, 100m
$1,870.48 (incl. tax)5 × $374.10
Hansen Medium Density Reducing Straight Coupling
Price range: $10.55 through $162.60
Used for connecting medium density polyethylene pipe (MDPE).
Details
Code
Price
Quantity
SKU: HMDRC
Features
- Manufactured in NZ using Best Quality Materials to withstand the harshest weather conditions
- Proven O-Ring seal for reliable leak free connections
- Potable (Drinking) water compatible
- Easy Grip Nuts for rapid winding onto pipe
- Sleek, Compact Design for easy installation
- Dependable High Quality Threaded components
Medium Density Fittings
Used for:
- Medium Density Pipe
- Blueline
- SKU: 2500-(OD Pipe Size)PN12-5-(Coil Length)
- e.g 2500-25PN12-5-100 (25mm = OD size, PN12.5 = Bar, 100 = Coil Length)
- Redline
- SKU: 360-(OD Pipe Size)PN(Bar Rate)-(Coil Length)
- e.g 360-63PN9-100 (63mm = OD size, PN9 = Bar, 100 = Coil Length)
- Greenline
- SKU: 370-(OD Pipe Size)PN(Bar Rate)-(Coil Length)
- e.g 370-32PN8-100 (32mm = OD size, PN8 = Bar, 100 = Coil Length)
- Blueline
Tips:
- Medium-density pipe is referred to by its outside diameter (OD)
- Medium Density Fittings go overtop of MD Pipe
- The pipe needs to be pushed past the o-ring in the MD fitting to seal
- If the MD pipe is scratched or gouged, it may not create a seal on the o-ring and leak.
- Use tools to tighten
Iplex
Blueline Medium Density Pipe - PN12.5
Price range: $3.17 through $1,484.25
Iplex
Greenline Polyethylene Pressure Pipe 20mm - 32mm - PN8-9
Price range: $124.29 through $369.89
Iplex
Greenline Polyethylene MDPE Pressure Pipe 40mm to 63mm - PN6.3
Price range: $234.84 through $1,228.65
Iplex
Redline Polyethylene Pressure Pipe 20mm to 32mm - PN9 to 12.5
Price range: $158.77 through $927.89
Iplex
Redline Polyethylene Pressure Pipe 40mm to 63mm - PN9
Price range: $257.39 through $2,614.11
-
Hansen Medium Density Grip Ring (Spare Part)
Price range: $0.68 through $10.79 -
Hansen Medium Density Nut (Spare Part)
Price range: $1.78 through $93.09 -
Hansen Medium Density O-Ring (Spare Part)
Price range: $0.32 through $4.62 -
Hansen Medium Density Thrust Ring (Spare Part)
Price range: $0.87 through $5.12
Can I use this fitting in my house water supply? Expand
Yes, the Hansen Easy Fit Compression Fittings are potable water approved.
Does this fitting carry Hansen’s Limited Lifetime Warranty? Expand
Yes, all Hansen manufactured products carry our Limited Lifetime Warranty*
Can I use Hansen Easy Fit Fittings under driveways, paths and foundations? Expand
Hansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths, or foundations.
How tight should I tighten my Easy Fit Compression fittings? Expand
Up to 32mm just tighten hand tight and all sizes above use a spanner to tighten another 1/2 to 1 turns past hand tight. Remember you already have a seal once the pipe is past the O-Ring, all the Nut is doing is compressing the Grip Ring onto the pipe to hold the pipe in place.
Compression fittings Tips
ID to OD Conversion Kits
Related Products
-
Hansen Medium Density Reducing Tee
Price range: $13.64 through $241.34 -
Hansen Medium Density Reducing Bracket Elbow
Price range: $28.38 through $33.86 -
Hansen Medium Density End Cap
Price range: $6.61 through $165.06 -
Hansen Medium Density Male Threaded Tee
Price range: $9.91 through $178.24 -
Hansen Medium Density Female Threaded Elbow
Price range: $6.15 through $199.17 -
Hansen Medium Density Male Threaded Elbow
Price range: $6.04 through $129.84 -
Hansen Medium Density Female Threaded Tee
Price range: $9.91 through $245.93 -
Hansen Medium Density Female Threaded Coupling
Price range: $6.37 through $149.68 -
Hansen Medium Density Elbow
Price range: $8.68 through $239.64 -
Hansen Medium Density Male Threaded Coupling
Price range: $5.06 through $143.05
