Go to cart
Call our Experts - 0800 130 905

Hansen Male Tank Fitting – White

$5.13$16.31

Used for connecting Low Density Polythene Pipe (LDPE), Flexible Pipe & Hose. Push on hose and use a hose clip to hold hose on. Used in tanks and in hulls on boats.

Details Code Price Quantity  
20mm – White Hansen Male Tank Fitting HTFW20 $6.44
 incl GST
25mm – White Hansen Male Tank Fitting HTFW25 $7.49
 incl GST
15mm – White Hansen Male Tank Fitting HTFW15 $5.13
 incl GST
32mm – White Hansen Male Tank Fitting HTFW32 $9.72
 incl GST
40mm – White Hansen Male Tank Fitting HTFW40 $12.18
 incl GST
50mm – White Hansen Male Tank Fitting HTFW50 $16.31
 incl GST
View Full Product Page

Features

  • Designed for use in tanks, troughs and a wide variety of marine applications.
  • Manufactured from UV Stabilised High Quality Glass Fibre Reinforced Nylon giving a weather, termite, fungi and bacterial resistance
  • Material Approved for use with Potable (drinkable) Water making them ideally suited to a broad range of rural & domestic applications
  • An extensive range of fittings in sizes 15mm to 100mm (1/2” to 4”)
  • Precision Heavy Duty Tapered Threads give a Strong Reliable Seal
  • Material is strong enough to minimise potential cross threading
  • Fittings provide flexibility and versatility for new and existing installations, saving on time and money
  • All materials are fully resistant to salt water making them ideally suited to marine applications.
  • norma 9mm

    Stainless Steel 9mm Wide Band Worm Drive Hose Clamps 16mm – 350mm

    $1.50$12.54
    Select options
  • green suction hose

    PVC Suction Hose – General Suction & Delivery Hose

    $6.36$56.28
    Select options

How To:

1.

img

Remove the Back Nut and the Low Density Poly Washer (the firmer of the 2 washers) from the Tank Fitting Body. Slide the Tank Fitting Body through the hole in the tank. The Rubber Washer must be between the Fitting Body Flange and the tank wall (ensure the ribs on the Rubber Washer are sealing against the tank wall).

 

2.

img

On the inside of the tank wall, slide the Low Density Poly Washer back onto the Tank Fitting Body and then wind on the Back Nut.

 

3.

img

Tighten the Back Nut so that the face of both washers make full contact with the tank wall to obtain a water tight seal. Ensure that you comply with the tank manufacturers specifications

 

4.

img

When adding additional fittings it is recommended that either a thread sealing paste or thread sealing tape be used on all threaded connections. We recommend Ceelon Thread Tape

  • Hansen Back Nut   Black

    Hansen Back Nut – Black

    $1.39$4.54
    Select options
  • White Back Nut

    Hansen Back Nut – White

    $1.39$4.54
    Select options
  • Hansen Back Nut

    Hansen Back Nut Left Hand Thread

    $15.62$21.95
    Select options
  • Hansen Large Back Nut

    Hansen Large Back Nut – Black

    $1.84$4.75
    Select options
  • Hansen Female Tank Fitting Washer

    Hansen Large Female Tank Fitting LDPE Washer

    $0.63$4.80
    Select options
  • hansen_rubber_washer_large

    Hansen Large Female Tank Fitting Rubber Washers

    $0.63$8.81
    Select options
  • hansen_ldpe_washer_large_male

    Hansen Male Tank Fitting LDPE Washers – Black

    $0.56$1.08
    Select options
  • LDPE Washers   White

    Hansen Male Tank Fitting LDPE Washers – White

    $0.56$0.94
    Select options
  • hansen black washer male

    Hansen Male Tank Fitting Rubber Washers – Black

    $0.40$0.94
    Select options
  • Rubber tank fitting washers (white)

    Hansen Male Tank Fitting Rubber Washers – White

    $0.69$1.51
    Select options