Go to cart
Call our Experts - 0800 130 905
Hansen Tank Valve

Hansen Fast-Flo Trough / Tank Valve Short Arm Pack

$20.15$21.45

For automatic filling & maintaining water levels in animal drinking troughs, water storage tanks & water cisterns etc

Small compact design suited to confined spaces ie small feeder bowls, troughs & header tanks

Details Code Price Quantity  
15mm Long Tail Adaptor – Fast Flo Short Arm Pack HFFSV15LS $21.45
20mm Long Tail Adaptor – Fast Flo Short Arm Pack HFFSV20LS $21.45
25mm Long Tail Adaptor – Fast Flo Short Arm Pack HFFSV25LS $20.15
View Full Product Page

Features

  • Each valve is supplied with: Complete Plastic Valve Body, Brass Arm & Long Tail Adaptors
  • performance, cost effective trough/tank valve - 29 psi, 34 l/min
  • Fast~Flo Short Arm Valve has the highest flow of any valve of its size at 500 kPa (73 psi) it will deliver 56 l/min
  • Ability to attach a diffuser hose to reduce water turbulence & noise in top entry installations & Anti-Syphon Holes to prevent back flow
  • Designed with an Ezi Bend brass arm to make water level adjustment a breeze
  • Will fit multiple thread & connection combinations 15 - 50mm
  • Reliable with high and low pressure applications from 0.2 - 12 bar
  • Durable urethane seat, which is reversible
  • Suitable for top or side entry
  • Manufactured from strong non corrosive UV stabilised materials

Overview

The Hansen Fast Flo Valve is ideally suited to tight fitting environments that demand a more compact sized valve with responsive on / off capabilities, exceptional flow rates and adaptability. The Fast Flo allows a hose attachment to both diffuse and help eliminate noise from the outlet flow and has a tough, reversible, urethane seat which effectively doubles the life of the valve providing a 'best of class' valve that's reliable for the long term.

How to:

Trough / Tank Installation:

  1. Flush pipe lines into water tank or troughs before installing Fast~Flo Valve into new system
  2. Isolate the water going to the trough or tank to replace valve in an existing system.
  3. Thread O-Ring end of correct size Long Tail Adaptor into Fast~Flo Valve Body and tighten firmly enough that the O-Ring creates a seal against the Fast~Flo Valve Body face. Do not over tighten.

Side Entry Trough/Tank:img

To Change Water Level Adjust length of cord at top of float. Use the nut & cord on the long arm valve only.

  1. Place the ribbed side of the Rubber (soft) Washer against the hole inside the trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the trough/tank wall.
  2. On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not over tighten.
  3. Screw the Cord Nut* onto the Fast~Flo Brass arm.
  4. Thread the Cord* through the Fast~Flo Float. Tie the Cord off to achieve the correct water level.

Top Entry Trough/Tank:img

Note: If there is an existing or moulded threaded inlet in the trough or tank use a Hansen Standard Adaptor.

  1. Place the ribbed side of the Rubber (soft) Washer against the hole inside the trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the trough/tank wall.
  2. On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not over tighten.
  3. Screw the Fast~Flo Float on to the Brass Arm, do not bend Brass Arm