Features
- Rain delay watering function
- Automatic watering
- Manual override
- Next run time reminder
- Low Voltage indicator
- Simple Dial operation
Recommended Installation Conditions
-
Ensure the water pressure is within the timer's specified range, typically 7-116 psi (0.5–8 bar) for most models
-
Install the timer in a location shielded from extreme weather, direct sunlight, and freezing temperatures (0°C or below). Operating temperature ranges are typically 0°C to 43.3°C.
-
Attach the timer to a standard 20mm hose bib with a secure, leak-free connection, ensuring it is not under excessive mechanical stress
-
Attach the timer to a standard ¾-inch hose bib with a secure, leak-free connection, ensuring it is not under excessive mechanical stress
-
Install the timer with the display and controls easily accessible and oriented to avoid glare or water pooling on the screen
-
Water should be free of high levels of sediment, sand, or debris (e.g., particles larger than 100 microns).
-
Water should have low to moderate hardness, ideally below 180 mg/L (10 grains per gallon) of calcium carbonate.
Specifications
- 20mm BSP inlet
- 20mm BSP outlet
- Watering frequency: 1hr to 12hr, 1 day to 7 days.
- Watering duration: 1 minute to 240 minutes
- 2x AA Batteries
- Operating pressure: 0.5 - 8 bar (7-116) Psi
- Flow rate: 5L/min - 35L/min
- Dimensions: 149.7 x 110 x 62.5mm
- IP54
- One Year Warranty
Other Models
Complete Your Purchase with These...
-
12mm x 20mm Plastic Tap Adapter
$1.73 Add to cart -
2-Way Splitter Adapter Manifold – 20mm BSP
$9.20 Add to cart -
Brass Tap Adaptor – Female to 12mm Snap on
$4.03 Select options This product has multiple variants. The options may be chosen on the product page -
MaxLife Batteries
$2.39 – $15.80 Select options This product has multiple variants. The options may be chosen on the product page
